KiurLab Tar and Glue Remover TARPEN 0,5l

Tar and glue remover TARPEN by KiurLab – effectively removes bituminous contaminants and glue

Do you want to quickly and effectively remove resin, asphalt or tar from paint or rims? Or maybe you have this type of grime on your windows? Don’t worry, your problem will be solved in a moment. All you need to do is use our tar and glue remover. Until now, removing resin and tar from paint could be tedious – now it is a thing of the past. Check it out!

What is a tar and glue remover?

A tar and glue remover is a chemical substance used to remove asphalt, glue, bitumen and other difficult-to-remove contaminants from the surfaces of metal, glass, rubber and plastics. You don’t have to rub the dirt or use a heat gun to heat the grime. Just spray, wait and wipe off the dissolved resin. Tar and glue remover KiurLab’s Tarpen also works great with sticker glue. Thanks to it, there will be no more problems with stubborn remains after removing film from a previously wrapped car or an old registration sticker.

Advantages of tar and glue remover Tarpen by KiurLab

• higher level of safety – Tarpen was created on the basis of natural orange terpene, which is exceptionally effective in removing bituminous contaminants. It is safer to use than other solvent-based products of this type and has a pleasant citrus scent.
• speed of action – the product is activated just a few seconds after application.
• effectiveness and reliability – the product copes well with contamination on large surfaces.
• long drying time – thanks to the slow evaporation of the product, after its application, the product can work on the paintwork several minutes.

How to use KiurLab Tarpen tar and glue remover?

Tar and glue remover is a strong chemical substance for specialized use. It should be used in accordance with the instructions included with the product. When working, ensure good ventilation of the room, use gloves, a mask and protective glasses.

Recommendations before use:

1. Shake the bottle before use to mix the contents.
2. Test the action of the product on an inconspicuous element of the cleaned surface to eliminate the risk of damaging it.
3. While working, avoid sunlight, which may significantly accelerate the evaporation of Tarpen from the cleaned surface.

How to use Tar and glue remover Tarpen by KiurLab

1. Spray the product on a dry surface from a distance of approximately 10 cm.
2. After a few minutes, rinse thoroughly with water under pressure or wipe off the dirt using a microfiber cloth.
3. Repeat the steps if necessary.

After finishing work, rinse the trigger with clean water, otherwise it may be damaged. Be careful not to let water from the trigger get into the product. After using the product, we recommend washing the car thoroughly with a dedicated car shampoo.

Capacity: 0,5l